Actually, I have thought about mounting an airbrush to the CNC I am planning on building. It would be pretty cool, especially if you were to use a really fine airbrush. The problem I have found is sometimes when you do really fine airbrushing you have to do multiple coats because not enough paint is laided down. However, you could fix this problem by just running the design twice.
Also, if you were doing multiple colors you would have to stop and change the colors. So for small pictures it would be pointless. However, you could do some pretty cool large pictures.
I may be wrong on some of this though, just tell me if you think otherwise. I only recently purcahsed my airbrush, so my experience is limited |