[Sbthomas13]

Hey, I know I know, this really has nothing to do with CNC, however, I am planning on building one. Here are some pictures of a dual-purpose screen printer/bandsaw table I built. There is no screen in at the moment, and I still have to devise a way how to make it so I can have interchangeable screens (but that shouldn't be to hard). It has a spring loaded hinge, and the printing area is about 11" x 15". I'll post pictures later of some of the prints I make.

The other shots are pictures of the rest of my workshop. All the tools are Delta Shopmaster, they work pretty well for my needs, however, only the drill press has variable speeds and they can only be accomplished by moving the belt. Also shown is my badger model 155 "anthem" airbrush, a 3 gallon compressor (I will probably upgrade it soon, becasue it can only support light airbrushing) and an automotive spray gun. Also theres just a cool stencil I made of an AK, it was my first stencil ever.

Sorry about some of the unlcear photographs, unfortunatley I was a little anxious to post them so I must have been moving. I'll try to take some more images during the day.