Another mill to look at would be a Sodick MC430L or a MC650. I was in a shop last week that just ordered a Roku Roku and it seemed like just an everyday HSM. I havent heard of anything bad about them other than the basic dont slam the spindle and that can go without saying for anything that has a spindle of 40k or more.
I know that if you are into linear technology you should look at the sodick mills cause that is the standard with the company. No ballscrew design with THK rails and multi linear motor per axis (4 on the X aixs alone). Machine comes standard with chillers to all the axis and to the spindle. I havent heard or any machine "wearing out" in 15 months by normal use but it is the salesman job to make everyone else to look like a steaming pile and theres to shine through the pitch black.
Here is a link to some info on the machine in case you are interested.
http://www.sodick.com/index.php?t=co...category__id=4