I have a homebuilt panel saw in my garage that uses rollerblade bearings on 2" conduit. I built it about 8 years ago. Just a circular saw with a $120 blade, but it cuts almost as good as my Delta Unisaw. It's also cuts perfectly square too, great for crosscutting 4 x 8 sheets.
Gerry
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |