Heres the pic of what we did... ill post the code later but it was a basic like 4 or 5 lines of code, just a circle done from bobcad.
Here's the code in question...
N1G40
N2G80
N3G90
N4G54
N5M3
S3000
N6 G00 Z0.25
N7 X0.4375
N8 G01 Z-0.05 F5.
N9 G03 I0. J0.
N10 G00 Z0.25
N11M5
N12M30
Last edited by scyan; 12-17-2006 at 08:18 PM.
|