I put a regular lathe chuck onto a TRT160 once. It was an adventure let me tell you that. Haas does show some mounting plates that random goodies in their rotary products catalog. Look there first and maybe you can buy something to fit an existing chuck. I had a spare chuck which was meant for a lathe. I remachined the back of it to make it work. It was a bear to indicate and it will be a monster to take it back off if I have to since it all bolts together from the back. I would recommend planning this allot better than I did. I was in a jam and I had nothing else. I settled for the fact that it was .004 out of round which was acceptable for the job. I just let it ride and got the parts done in time.
Phil |