Originally Posted by mad mark  I'm getting a fadal 4020 ht with a vh-65 4th. Mostly 2 1/2d work but some complex 3d and 4th work.
I haven't bought anything yet and thought I check into all of my options first. I've always used Gibbs, Mastercam, and Smartcam, but have seen a little of bobcad in use and like it's post processor capabilities!!! Do they make a post for the fadal fromat 2?
Thanks, mark |
Here is a link to all the BCC Post Processors. These are Free and if it doesn't work for you they will work on one for you for FREE!! http://www.bobcad.com/index.php?select_page=posts_index
Cheers  
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |