Are you working with build V4 1.28? I just checked and, in imperial units, mine defaults to .020" for "put arcs in toolpaths." Sprutcam fixed a number of imperial units problems in 1.28.
I got the cylinder to lie along the x-axis.
1) choose an operation, i.e. Roughing Waterline
2) select wokpiece -> cylinder -> from centerpoint -> fill in D and LZ, i.e. 1,5
3) workpiece cylinder is shown along the z-axis
4)Goto to top menu bar -> "Create Coordinate System"
5) Click Rotate -> enter 270 degrees around y
6) workpiece cylinder is now lying along the x axis.
Is this what you wanted to do?
Terry |