i am so glade that i finally find something usefull on the internet that can help me to fix my problem.
it's been a long time since i buy my okuma lsn-10 osp-2200 lathe but almost 6 years i can't get this thing started
i buy this as a undamaged and in a good condition mashine that has work in a workshop in switzerland,but from the first start i know that something was not ok.
many peopels and professionals try to fix the problem but nothing happend
1 year after my father and i buy this mashine we make a decision to call switzerland and tell about the problem and we came to the final decision to bespeak the binary and the program tape from japan.
and anybody now what happends next :P
the tapes dont fix the problem
after that,we send the tape reader to switzerland and the say that the tape reader are intact.
we also try to program the osp2200 with the klik klak switches on the front table of the osp2200 and nothing happends
we also detect that the tape do not stop on the position he should and he wont stop until i press reset.
now i find mastercam x2 and predator dnc on the internet and i am not sure that this programs can fix my problem-i also have a rs-422 connector on the osp2200
i almost forget-on the main display are no error codes just sevens and nines on all lamps and they dont changes all 6 years
i have the complet user guide of this mashine and we try everything step by step but nothing
soo if anybody can halp me to fix my problem then please write in this treath and i will be the happiest man on the world
really
PS-sorry for my english,i try my best
