[CuttersCov]

Originally Posted by Oldmanandhistoy One more question; how would I know if a question I have needs expert advice, so would need to be posted here instead of the relevant forum. For instance I recently posted this (after doing a search of course) http://www.cnczone.com/forums/showth...313#post214313 did I post this in the correct forum or should I have posted it in this forum for the experts to answer? John

John,

For something like that I would have emailed that company directly. I read that thread and what you want to know seems fairly technical. I would tend to agree with Gerry, though, steppers can't stop on a dime unless you cut power. I have steppers from Bob Campbell and have been messing with them all week in Mach3 if I jog them one direction then immediately jog in the other the motors don't immediately reverse. Keep in mind this is just an observation and may only apply to what I am doing.