I talked to Richard of SyilAmerica. Awesome support over all.
We managed to get some issues with axis (more of configuration issue than anything else).
We had some problem with spindle control and the fact spindle turning doesn't quite soudn right. I suspect shipping damage on pulley or manufacturing proces (it doesn't turn concetric on motor mount side as well as screw holding the pulley is really stripped).
Richard is looking into issue and we will touch base again shortly.
One thing for sure, I can definitely see this company evolving each sales they make just like I do with my small business.
(I really understand how it can be sometimes time consuming and stressing when trying to diagnose things over the phone when someone doesn't have full knowlesge or practiced in field).
Over all, I probably will be delayed a little over a week from actual cutting of my things in perfectly operating machine but I have no doubts at this point that I will get there with Richard and Xusho backing up on their product.
Big Kudos to you guys
(and let's keep it going smooth so I can keep giving you more praises :P)