We have the pod placement feature on our Busellatos supposedly they use that, but still hitting pods and I guess it’s a little time consuming.
I used to just set the part thickness up and run it part way through, move my pods out of the way, set the part thickness back to spec, and re-run the part, but they cant seem to get the parts loaded back to the same place so its trashed when it routes the second time.
we run very small batches, maybe 5-10 of the same parts, most times you have 1 or 2 of the same, so setup is critical and I just don’t know what to do at this point, we’ve been going through people pretty quickly, the people we are getting have little or no experience with PTPs.
Thanks |