Yea I have the penguin program. I'll do that today, start at 9600, and how do I set the baud rate of the cnc side?
I already installed a CD / R by just hooking up a long IDE cable to the hard disk. Just like you said no problem. I can now swap and record, but not much use if my 422 port is not working.
I have NC Fadal as well which is supposed to be a file transfer utility that has a 32mp protocol. That doesn't work either....ugh.
Not only that but the Gibbscam that came on the hard drive won't start up because the hardware lock is the 422 port...figures.
Someone shoot me.
Hey Scott think you could send me a pic of the motherboard (in the pendant) on your machine and a shot of the card cage, the axis and memory contoller cards so I can compare and see if everything in my machine is hooked up right? |