Greg,
Thank you very much for getting the machine working with me this morning. I had a few problems with collition, but changed the SP and it seemed to help, also had the wrong tip in the torch. I need to order some 40 amp tips, all I have here is 60.
steel cuts good, but had problems with losing the arc on aluminum, I was trying to cut 3/16 aluminum and lost the arc, but the gantry still moved. Guess settings for 3/16 and 1/4 aluminum are precise, if you have a solutuion please send, or post them in here like we talked about earlier.
Thanks again for the help!!!!!!
Ed |