Scorpion,
I too have some issues right out of the box with my Dyna table. During welding the table they abviously didnt look for "warpage" the middle of the table from the disstortion os wider then the ends. They were closed Friday for a move when I called, so I will see about this when Will calls me Monday.
Needless to say when the side support legs were drilled they were not square, hense the gantry isnt wide enough to clear the machine bolts holding the gear rack on. This is why I ordered a table already made so I did not have to worry about squaring or welding a table together.
The Powermax 1000 also didnt ship with the table, so i am waiting for that to come to hook all the wires up and do the set-up (3 days lost) Now I need Will to send me spacers for the drop side of the gantry so it will slide smoothly and more then the 6" now. I am a little upset to say the least, but I will give them a chance starting Monday to resolve these issues ASAP.
We cut 16-14-12-3/16 and 3/8 steel, do you have any tips for those thicknesses re: voltage settings-torch height-IPM-kerf setting to get good clean, minimal dross cuts? If you could help me out that would be great, my email is
whome124@aol.com.
Maybe we should start a thread just for Dynatorch users, seems to be a few of us here now. Thanks alot.
Ed