This CNC hobby, like others is still not cheap in my opinion. My Wood Router that is on my website is something I built from scratch for a learning experience. Even using just plywood for the structure I still had over $300.00 into this thing, and it cut like sh#*. Using Stepperworld’s first Unipolar design it had no power at all.
What has other people spent on their router or mill for CNC? Was it a usable machine when you were finished?
__________________
Thanks
Jeff Davis (HomeCNC)
http://www.homecnc.info
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |