Originally Posted by peter.blais  Well, that might work, but you'd need to start with some hugely thick wall tubing and machine 3 of the sides flat as the injector pockets are typically like half an inch deep. I could buy 72+ feet of it retail for ~$7.50 / ft which would be the way to go if I didn't want to just extrude it myself. Pretty sure I want to have it extruded though as I can sell it as both finished products and material. |
Well I guess I was thinking that if this was a small project where you dont want to spend $1800+ for tooling, that would be a cheap way to get what you want without the tooling costs. But if other folks are selling fuel injector rail extrusion, why bother getting it done yourself? Aeromotive sells the stuff too - but on your initial question, I think you can do better on that price probably by half.