I've try both CNCDunez and InterpCNC board with GALAAD.
InterpCNC board is very useful and perfect for hobbys't use.
The bigest advantage of this board is that you can use Ninos or GALAAD.
Ninos is very cheap and GALAAD is not so cheap but very powerful.
This board is the cheapest way to use GALAAD.
Information on InterpCNC are available here :
http://hdarret.free.fr/cnc2/projet_interpolateur.htm
It's in french but you can contact the author in English. Ther's no problem for him.
Originally Posted by CLaNZeR  The pinouts are on the Firmware link at the bottom and shows what each port on the 18F4550 does.
Regards
Sean. |