I'm an old data base person (also anal) and have done lots of searching and reading on this forum and finding something is not always easy.
Would it be possible and practical to have a few click boxes that pertain to the machine the person is describing, such as.
Describe the machine you are posting:
Servo ( )
Stepper ( )
Movable Gantry( )
Movable table ( )
Skate Bearings ( )
Linear Bearings ( )
ETC...
Then when a person, especially a newbie could find articles quickly that they are interested in, there's lots of really good information in this Forum but not always easy to find.
Thanks
Hager |