Hello,
I know this machine, I learned the programming 10 years ago on a MH400.
This machine was always broken down ( and don't remember why, maybe due to an electronic card ) and some G code are different from Fanuc for exemple.
Else, it's good to start, these machine can communicate with a pc with a rs232 port.
That which I knew have a remote controller but it is an option.
I think that is more interresting to buy a Fanuc or an Heidenheim, it's more easier to obtain spare parts ( my opinion ).
But all that depends the price, it's your job to take the decision. |