Originally posted by NeoMoses
Ok, let me re-state that: We all know that the real power of the internet lies in the links. No single site can hold all the information. Also, there happens to be some very good resources for CNC conversion at an "unmentionable" site. Unfortunately, no "Ultimate CNC Forum" will be complete without many references to it.
Realize this: The "forum" layout is much better than that of any other "group" or usenet channel that I've seen. It will ultimately be the preferred site, due to its speed and ease of use. It's just going to take a lot of time, and some "cross-breeding" of members. I joined this forum to share information openly and fully, in the hopes of helping others. I hope that is the purpose of this forum, and not my misunderstanding. |
I agree, but if you mension a website like this there, you will most certainly be BANED from them. I have NO problem with links to anyother site but, I don't want to support that site and all it's groups. I hope you understand, my postion at this time.