I am trying to design and build an simple cnc milling machine ,so please help me too. I have little knowledge about this machines( I know the basic concepts but I don't have any experience). I can handle the electronics but I don't know what drivers to choose and some help in designing the circuit will be usefull.
So I want that my machine to be capable to cut in foam at least and to be as large as posible.
I have 3 unipolar 5,2V ( one 1,4A the others too it's not speciefied) and hope to use them, I'm thinking to use the UCN5804B to control them.
For the software I have TurboCNC but I don't know how good it is.
Please help me.
Last edited by wenderro; 09-21-2006 at 06:46 PM.
|