Thanks for the thought anyway.
Yes, what I need is Emco owners in Australia, they are bit slow putting their hands up, perhaps they are not on here.
I must admit I am a machine user, not a machine builder and my electrical knowledge is limited to "if the smoke gets out of the wires, I need a new part"
Having said that I think being on this forum might be bad for my health as I seem to be contemplating a drilling machine with a rotary table and an X axis.
In fact I have previously told Nigel it was not worthwhile, but we are now getting up to around up to 5000/10,000 holes a month and our arms keep falling off.
The holes are only 4.5mm but there seem to be an awful lot of them |