Thanks for the reply Gerry. The DROs were not running at first but I figured that out. I've actually been able to get the motors to run intermittantly and only after a reboot without running any other software, but they were not smooth at all compared to how well they run on EMC. I am using AVG antivirus but I did the driver test and the noise showing up was minimal. I'm going to play with this some more to see if I can determine what is interferring with this.
Here's a little info on the system and OS
P4 775 socket 2.8 Ghz 800mhz FSB
1 meg ram
XP Pro
AVG anitvirus firewall only on router
Gecko 201 driving Slo Syn motors |