Originally Posted by xscsime  Because I used the half inch 8 2 start lead screw I had to make my own plastic nuts. I made a tap out of small section of the lead screw and cut the nuts out on my old router. It worked pretty good. The only nuts I could find were around 40 bucks a piece. | http://www.dumpstercnc.com/leadnuts_acme.html
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |