Hey Scott,
Maybe a short crash coarse in 4th axis indexing. Setting the Software up for milling and Turning operations.
Explainations of the Canned Cycles and how they work would be good as well.
G70,G71,G72,G73,G74(Drilling and Trepanning/Face Grooving),G75,G76,G90 (Cutting cycle A),G94(Cutting cycle B),G92(Threading for Lathe/WPC for Milling).
Drilling and Tapping Canned Cycles in Milling and Turning (G73,G74,G76,G81,G82,G83,G84,G85-G89)
Have you finished all the Canned Cycles so that the back plot simulates correctly?
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |