Originally Posted by mark95621
I have read discussions about using "G-code" for machine control, I have decent skills with AutoCAD but have no idea how to go from .dwg files to G-code. Can someone advise me on this as well.
|
If you use AutoCAD 2002 or newer, I wrote a macro to create g-code from within AutoCAD. http://www.cnczone.com/forums/showthread.php?t=8226
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |