The bottom bearings that were in the spindle were RHP 7207 TU EP3 and the top bearing was a New Departure Q 30206 DTL and it appears that it was specially reworked as the 'Q' and the 'DTL' are etched by hand.
After speaking to the bearing supplier he said that the RHP 7207 TU EP3 is different than the original ones he supplied, but they were stock bearings and we hoped they would be the right ones so there would be little down time (I have a job on the go). New bearings to match the existing RHPs are $428 plus taxes (ouch!)
They haven't been able to come up with a match for the M206 K 132J30.
LaVerne |