Keith,
There is a new feature in XP that goes along with what you are saying about making a copy to a different layer.
It's under the move/translate button, it now has "make a copy"(and number from 1 to 99) and "copy to layer (you can now move your copy to a different layer) and "enable scale" (you can scale to different size).
This is really slick as you don't need to copy to clipboard or blank anything.
Only the "copy to layer" is new to XP the other two are in Mill 2000.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |