ummm.... the only 24x24 I have seen was from torchmate.com, and it was still in the 4-5000 dollar range. You can quite possibly build one for less than that (minus the plasma itself), or have someone build it for you. I have an oxyfuel table (that will also run plasma) that I have way less than that amount in that I built myself,computer and software included in that amount. IM me if you need some more info, I will see how much I can help you out.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Last edited by massajamesb; 07-30-2006 at 06:27 AM.
Reason: addition and correction to post
|