we have a dynacnc table. having some issues. we are new to this and had read alot on here before buying this table. table seems to be good quality. pm me for details on why i would not recommend anyone buying one. aside from that needing some help on why parts are being cut like the pic below. also have bobcad, sheetcam, and mach3 1.84.002. when we design a circle or square in bobcad, open drawing in sheet cam, create cutpaths and set up machine and material, why does the circle look ok until you zoom in and you see some rough lines. when it cuts it cuts good except the rough lines that you saw in sheet cam. square is the same way. we have not cut a good clean to specs circle or square yet. seems also that when cutting a square, the cut leads out before it cuts all of the material and leaves a sharp point. also mach 3 seems to lock down computer when trying to open sometimes. have to manually turn computer off and turn back on. we are willing to pay through paypal to someone who would take the time to contact us by phone for some technical assistance. we are way behind with this machine and need to get up and running alot better than it is right now. any info is greatly appreciated.
http://i37.photobucket.com/albums/e5...dynacnc009.jpg http://i37.photobucket.com/albums/e5...dynacnc008.jpg