Hi Diarmaid
Thanks for the comments and corrections.
The 2 incorrect links have been fixed. Those without links are still to be created. The logout button is more obvious now.
Regarding "missing" dimensions: Those drawings won't get much more dimensions because then there will be too many!
For parts intending to be laser-cut, the scale .dxf is available to the laser cutting company (all the lasercut parts already have their .dxf drawings in the download area). These are the file names with the second last character being a P.
Assembly drawings seldom need any dimensions. (second last character A)
A "cut-to-length" drawing only needs one dimension (second last character S (for Saw))
A "recatangle-cut-from-sheet" needs two dimensions (second last character G (for Guillotine))
Etc.
In the "T" drawing for the V-Tyre, you might say there are too many dimensions, but again I think that is the minimum required.
The logic will become clearer with time - have a look at the bottom of the .xls file, the "WBS" for a key.
There will be an area of variable dimensions where folk are going to customise the table bed sizes, and this affects a lot of the drawings still to be posted. A discussion on that will be linked into the Forum.
Hope I've answered you okay - please feel free to ask more. Thanks again for spotting the errors.