[DaSigntist]

Howdy I've got everything hook up and "FAULT" is all I get from the geckos.

I realize I will need to tune them after I get them going I just can't get them to get power to the motors.

My setup:
1100 oz/in servos with US Digital encoders 48 VDC

Power supply:
54 VDC 20 amp (two 54VDC 10 amp) I've got another to make 30 amp if needed.

Any thoughts to how to trouble shoot it?

I need a book "Geckos for Dummies" ;-)
I'm so lame on the electronics end of the scale.