Originally posted by buscht
Darren, some other things that you haven't mentioned are the lead screws that you want to use, I'm guessing that these could cost anywhere from $25 to $100 per axis. Framework could run another $200 |
I have all the aluminum I could ever want and I figure my lead screws being acme screws will be no more than $20 per axis. I plan to make my own anti-backlash nuts etc...
Why does the servo control box cost $800 to build? What am I missing???
3 Gecko's = $350ish
Power Supply = $50?
Heat sync's = ??
Misc. Cables = next to nothing
What else?