[Stile2]

Everytime I generate a post for use on a Prototrak the Z's are all positive. The ProtoTrak wants to use the top of the part as Z0.0000 and into the part as negative Zs.

How can I change the post to look at the top of the part as the Z0.0000 and into the material as negative Z?

this is from a post that works (from another CAM)
%
O0000
N1 G0G17G40G49G80G90
N2 M6T2
N3 G0G54X-0.0501Y-0.3984
N4 G43Z2.H2
N5 G00 X-0.0501 Y-0.3984 Z2. (Z2.0 is tool change position)
N6 Z0.1167 (Safe distance from the part)
N7 G01 Z-0.0833 F150.0 (Milling the part)
N8 X0.1507 Y-0.4014 F300.0

Here is from your post processor
%
OTest Block
N1 G21
N2 G40 G54 G80 G90
N3 M06 T1
N4 S4000 F300 M03
N5 G43 H1
F20000
N6 G01 X-0.219 Y4.253
N7 Z6.454 (the ProtoTrak barely has this amount of movement in Z)
N8 G01 Z6.000 F300
N9 Y0.000 Z5.250 F300




Thanks

Keith