Hey All, As with HSM I have found a lot of information here. My old Kent Miller with Anilam control has died.My Servos are good(SEM with Tach output) Glass scales are in good shape Standard Acurite,anilam. Can I use this with the Gecko 320/340? Or do I need to swap out the tach for an encoder. Right now I have Glentek drives velocity control. The controller gets realtime feedback from the scales. I am tired of entering G code at the box am thinking of using mach1 or turbo cam. Driveing thru the parallel port or through an compumotor indexer I have PC23.
Thanks for any help or sites to goto where others have refit their machines.
David |