Originally posted by mrainey
A change in focus (via mouse click or Tab key) doesn't display the recalculated tap drill diameter on my system (XP Home) |
Oopsie.. my bad. 
Try this one. I added the Calc button and saved settings for the type of tap selected.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |