Cold Fusion, it's hard to say what it cost, because I started gathering parts for a 4x8 table, then found I had enough spare parts to almost build the small table. I have about $5000USD spent so far, but that includes about 70% of the parts for the 4x8 table. If I had to guess I would say it cost about $2500USD. My original plan was to try to build the 4x8 for less than $7500USD, it's starting to look like both together will cost about that much. If it works out that way, then this one will have effectively cost me nothing.
Blood, sweat and tears not included in the above.
Steve