Ok I have been on the phone with Fanuc. The battery pack had died wiping out the whole memory. I have reinstalled the parameters. Unfortunately I did not have these backed up on disc but had the origianl setting from the factory on paper. Not all the parameters got wiped out but some are different then what is listed on the paper. Mostly they were parameters 8100 thru 8266. Beside the parameter's on paper in the remark column it says, Auto Set Value. Should I leave these alone to what they are or change them to what is on the paper. Also, the letters on the keypad are now not working but the numbers on it are. Thanks for the help you guys have given me so far, and thanks for anything further. |