Tony,
I am now thinking that I do not have the latest version of post processor for Vcarve. When saving toolpaths under one file Vcarve will only allow me to save multiple V-bits provided they have different tool number.
Vcarve will not allow V-bits and End mill toolpaths to be save under one file even if my endmill tool has a different number from the v-bits. (Ex. vcarve 1, vcarve 2, and endmill 3)
What is also interesting is that if I save the multiple V-bits under one file and then load this in Mach 3 the designs displays properly in Mach 3.
I sent support the post processor I am using with Vcarve so hopefully they will tell me that my problem resides with an outdated postp.
Thanks,
Chris |