[drthilina]

I'm new to these CNC stuff, for my luck the machine broke down right after one week of its installation. I think the settings option you are talking about is achieved, by pressing the Settings button.
I'll see about the Input device 2 and see.... we have a small machine that is fitted to the serial port (you know it acts as a programme sender and reciever) and if I ready a programme in that, and press "read" in the NC the programme is sent. so I'm guessing that the BIT is set to "1".
if im to change it do i need to set "PARAMETER WRITE" to ENABLE?
Is it possible then for me to load the paramaters through the Serial port? or back it up?
I have the NC parameters on paper tape with me and its date is marked as 1984 so i'm a bit afraid to do much with it. Anyway, the Machines CRTC/PUNCH card is down, so I'm waiting till we get the other one!!
One small question, I have a GRAPH/PUNCH card with me, before the breakdown it worked fine with my 9" CRT, but now the thing is giving trouble, Arrow marks appear and goes, the text is shown on-top one another, the NOT READY alarm blinks everywhere in the screen!!!!!!!!!!!!!, Any Idea?