So back to enclosure design again. I'm with you Balsaman, I live in a small neighbourhood, where my shed (and router) back onto many other gardens. I have been thinking about an enclosure for the router spindle itself that would fit on the z-axis. Perhaps surounding the spindle with a sound dampening foam, in an MDF (or other dense material) shroud, adding intake fans at the top, and perhaps some flaps and brushes at the bottom to reduce the noise there too. I guess you could add baffles between the intake fan and the spindles top to reduce noise also.
Any thoughts/experience of this type of small enclosure would be useful, I may draw up some plans tomorrow just to get some opinions, but it's too late over here now, I'm off to bed! |