Hi Mark,
First archive your original copy of the file(s) as found in your Mill expert/ setting folder. Then, just place the files from the zip archive (unzipped) in there. This should work, at least it does on the two systems I am trying to keep in sync here.
If you have trouble, let me know.
__________________
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Last edited by HuFlungDung; 04-19-2003 at 10:15 AM.
|