I figured it would be a little easier just to copy my question and post it here, Instead of having to go backward and forward. Here it is:
10-12-2005, 07:33 PM
CNCRob
Moderator
Donation Contributor Join Date: Feb 2005
Location: USA
Posts: 617
After about a day and a half of digging through my machine at work I finely figured out how the machine knows where to set the zero at. There is a file in the system directory called G401, It has all the measurements of all the heads in it( i mean the measurement from the bottom of the collect to the table for each head). In each of our programs it calls for the G401 file. I still don't know if anything like this is possible in CNCZeus. If you have any ideal please let me know. Thanks- Robbie |