The early Fanuc & Mitsubishi DC servo's were either Gettys knock-offs or were made by Gettys, side-by-side they look identical and I have interchanged them, as they are fairly flexible motors, and the specs of the Rutex definately look like they would cover these motors.
I personally have not used them with Rutex, but have with other makes with no problem.
Remember to adequately size your power supply and aim for at least 3% to 5% above the terminal voltage.
Al.
__________________
CNC, Mechatronics Integration and Machine Design.
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E. |