Originally posted by fjd
i have read this many times and still don 't
know how to right the code for it |
I read it a few times, and it really is a poor translation of something
What is all the Q201 to Q212 stuff? From the posts I looked at in Onecnc, the format for Pecking cycle 1 for all the Heidenhain are similar, like this:
CYCL DEF 1.0 PECKING
CYCL DEF 1.1 SET UP (rapid plane)
CYCL DEF 1.2 DEPTH (drill depth)
CYCL DEF 1.3 PECKG
CYCL DEF 1.4 DWELL
CYCL DEF 1.5 F
L X Y FMAX M99
If I knew where the Q2** entered into the picture, I might be able to decipher the message.