Well, as Ive expressed my thoughts earlier that its difficult for a individual or group to sell books that help others possibly harm themselves. So, the guy that ran the above mentioned website before it was closed down mentioned melting legos and YOU CAN TELL THAT PLASTIC IS TOO HOT, based on the color of smoke emitted. Correct me if i'm wrong but isn't it grey or white? So a good temperature should be around what for melting for example, legos? Answering these two questions should clarify some confusion here and get some gears crankin.
My suggestion, Keep an eagle's eye on ebay for "plastic injection mold," "plastic mold machine," and the like. I came across 3 or 4 machines within the 350 to 500 range, even a larger what I would call medium scale machine. that one went for nearly 800 if I can remember.
I'd like to make an all electric machine using ac motor, power steering pump to move hydraulic cylinder and a PLC to controll sensors of various locations. too occupied at the moment. |