The best way to do it would be to set up 2 profiles, one in inches and one in mm. Then just set up an icon to start each one.
If you have the CAD file, it's just a matter of scaling it to convert. Multiply by 25.4 to convert inches to mm, divide by 25.4 to convert mm to inches.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |