If you get stuck on a program again, post the conversational file on here so we can open it up and look at it... That problem you have is pretty common... (Forgetting to shut off something like, rotate, mirror, or disabling a drill cycle, mill end, etc.) I personally can look at your file because I have Cent 7 and see what's wrong but I couldn't fix it and send it back because you can only go up and not down with the softwares. (Is 'softwares' a word??)
__________________
Gimpy aka 313 (three thirteen)
The early bird may get the worm, but the second mouse gets the cheese.
Last edited by AMCjeepCJ; 04-08-2006 at 01:21 AM.
|