[QUOTE=markm]The files that i have tried to mill using the Bobart turned out fairly poor.
Don't take this personal, but it not the software or the machine. Bobart assume that the person who is doing the cad/cam work has a good deal of skill. If you just want to do simple work than it not the software for you. 3d work is not something that an average machinist can do even the good one go crazy trying to make 3d shapes. People tend to think that if the software can draw it then it can be made. Sometimes that true and sometimes it not. Bobcad and Bobart are for the user that need that level of programming, it not for everyone
Last edited by lakeside; 03-31-2006 at 10:56 AM.
|